Emerson PD3500RD Owner'S Manual Download Page 10

Page: 10 / 35

GENERAL CONTROLS

Volume Adjustments

Press the

VOLUME

buttons on top panel to increase or decrease the

volume. The volume level indicator appears in the display.

The range is from “

” (Minimum) to “

”

(Maximum).

The system remembers the volume level when the power is switched ‘Off’ and

returns to the same level when the power is switched ‘On’ again.

EQ (Preset Equalizer)

This system has a 4-Band Preset Electronic Equalizer that allows you to adjust the

tone output for the most popular types of music.

The settings are “

CLASSIC

”, “

ROCK

”, “

POP

”,

“

JAZZ

” or flat (no EQ).

To change the EQ setting press the

button on the top panel until the desired

setting appears in the display.

PHONES Jack

Connect a set of stereo headphones (not included) with a 3.5mm mini plug to the

PHONES

jack (located at back cabinet) for private listening without disturbing others.

Before putting on the headphones reduce the

VOLUME

control to a low level, then

put the headphones on and gradually increase the

VOLUME

control to a comfortable

listening level. The built in speakers are automatically disconnected when

headphones are connected to the

PHONES

jack.

OPERATING INSTRUCTIONS

PD3500RD_102904.p65

29/10/2004, 15:36

Summary of Contents for PD3500RD




































Search results

Summary of Contents for PD3500RD

Reviews:

Related manuals for PD3500RD

Brands by name

Popular brands

Emerson PD3500RD, Owner'S Manual

Search results

Summary of Contents for PD3500RD

Reviews:

Related manuals for PD3500RD

Brands by name

Popular brands