PACMotion VFD PROFINET Configuration User Manual
Section 2
GFK-3226A
Feb 2022
PROFINET Configuration Steps
3
Section 2:
PROFINET Configuration Steps
2.1
Simplex Configuration
The following steps are required for a simple PROFINET connection.
1.
Connect PME
Attach the computer running PAC Machine Edition (PME) to the PACSystems Controller to be
configured.
2.
Configure the PROFINET Controller
On PME, select the hardware configuration for CPL410 and set LAN 2 Mode to PROFINET (Figure 2). For
additional details on programming a controller for a PROFINET network, refer to the GFK-2571,
PACSystems RX3i & RSTi-EP PROFINET I/O Controller User Manual.
Figure 2: Enable Embedded PROFINET Controller
