9
PLAYING COMPACT DISCS
Raising And Lowering The CD Door
• To open the CD door press downward on the corner of the CD door in the area
marked “
OPEN/CLOSE
”. The door will open slightly..
• Manually raise the door until it is fully open. The door support bracket will hold
the door in the open position.
• To close the door pull the door support bracket toward you to release it and
lower the door. Press downward on the door to close it completely.
1.) Turn the
ON/OFF-VOLUME
control clockwise until a ‘click’ is heard, and set
the volume to a low level.
2.) Set the
FUNCTION
selector (
AUX/CD/TUNER
) to the
CD
position. The CD
track number display comes ‘on’.
3.) Open the CD door. Lift the CD clamper arm, remove the transit card which was
used to secure the laser during shipment and dispose of this card.
4.) Place your disc on the CD spindle with the printed label
side facing up and lower the CD clamper arm. The disc
will spin for a few seconds while the player reads the
disc, then the disc stops and the display shows the total
number of tracks on the disc.
5.) Press the CD
PLAY/PAUSE
button to begin playback
on track number one. The Play indicator comes “on”
Note:
You may leave the CD door open during
playback if you wish, but we recommend closing the
door again for better sound and also to prevent excess
dust from accumulating on the CD spindle.
6.) Adjust the
ON/OFF-VOLUME
control to the desired level.
PLAY/PAUSE
NR53_010704.p65
7/1/2004, 17:24
9
