How To Put Your Ceiling Fan Together
1.
Align the four holes in the fan housing with the
holes in the mounting plate and install four M5 x
10mm Phillips pan head screws with internal tooth
washers (supplied) (Figure 6).
2.
Mount the blade flanges to the fan blades using
three M5 x 6mm Phillips washer head screws per
blade (supplied) (Figure 7). Repeat for four
remaining blades.
3.
Attach one blade assembly to the motor using the
captive screw provided for each flange (Figure 8).
Make sure the screws are tightened securely.
Repeat this procedure for the other four blade
assemblies.
NOTE: Take care not to scratch the fan housing
when installing the blade assemblies.
4.
You have now completed the assembly of your new
ceiling fan.
CAPTIVE SCREWS (2 PER FLANGE)
BLADE FLANGE
BLADE
Figure 8
BLADE
FLANGE
FAN BLADE
M5 x 6MM PHILLIPS WASHER
HEAD SCREWS (3)
CAPTIVE SCREW
Figure 7
FAN
HOUSING
M5 x 10MM PHILLIPS
PAN HEAD SCREW (4)
Figure 6
Using Your Ceiling Fan
1.
Restore electrical power to the electrical box by
turning the electricity on at the main fuse box or
circuit breaker panel.
2.
Check the operation of the fan by gently pulling on
the pull chain switch.
3.
All fans are shipped from the factory with the re-
versing switch positioned to circulate air downward.
If airflow is desired in opposite direction, turn your
fan off and wait for the blades to stop turning, then
slide the reversing switch to opposite position, and
turn fan on again. The fan blades will turn in the
opposite direction and reverse the airflow.
REVERSING
SWITCH
SPEED
CONTROL SWITCH
Figure 9
To reduce the risk of personal injury, do not bend the
blade flange when installing the blade flanges,
balancing the blades or cleaning the fan. Do not
insert foreign objects in between rotating fan blades.
WARNING
!
To reduce the risk of fire or electrical shock, do not
use this fan with any solid-state speed control
device.
WARNING
!
6
U.L. Model No.: 52-CL
Your fan model is equipped with a 4-position,
3-speed pull chain switch. The operating sequence
is as follows:
THREE SPEED:
1st Pull – High
2nd Pull – Medium
3rd Pull – Low
4th Pull – OFF
Summary of Contents for Northwind Contemporary Snugger CF804SBS01
Page 10: ...10 U L Model No 52 CL Notes ...
