Emerson MVME55006E Installation And Use Manual Download Page 72

Page: 72 / 146

MOTLoad Firmware

MVME55006E Single Board Computer Installation and Use (6806800A37H

)

MOTLoad RTOS Version 2.0, PAL Version 1.0 RM01

Mon Aug 29 15:24:13 MST 2005

MVME5500>

If the partial command string cannot be resolved to a single unique command, MOTLoad
informs the user that the command was ambiguous.

Example:

MVME5500>

"te" ambiguous

MVME5500>

4.4.1

Rules

There are a few things to remember when entering a MOTLoad command:



Multiple commands are permitted on a single command line, provided they are separated
by a single semicolon (;).



Spaces separate the various fields on the command line (command/arguments/options).



The argument/option identifier character is always preceded by a hyphen (-) character.



Options are identified by a single character.



Option arguments immediately follow (no spaces) the option.



All commands, command options, and device tree strings are case sensitive.

Example:

MVME5500>

flashProgram –d/dev/flash0 –n00100000

For more information on MOTLoad operation and function, refer to the

MOTLoad Firmware

Package User’s Manual

Summary of Contents for MVME55006E



















































































































































Search results

Summary of Contents for MVME55006E

Reviews:

Related manuals for MVME55006E

Brands by name

Popular brands

Emerson MVME55006E, Installation And Use Manual

Search results

Summary of Contents for MVME55006E

Reviews:

Related manuals for MVME55006E

Brands by name

Popular brands