manualshive.com logo in svg

Emerson MS3111M, Owner'S Manual, Page: 20 / 47

Share
Download
Emerson MS3111M Owner'S Manual Download Page 20

19

Volume Controls

To increase or decrease the system volume press the 

VOLUME 

 or 

VOL +

buttons on the front panel or the remote control.

The Volume Level Indicator will appear on the

display when you change the volume level.

The level indicator ranges from “

00

” (Minimum)

to “

30

” (Maximum).

The system remembers the volume level when the power is switched ‘Off’ and

automatically returns to the same level when the power is switched ‘On’ again.

EQ (Electronic Preset Equalizer)

The preset equalizer allows you to adjust the sound characteristic for the most

popular types of music.

Press the 

EQ

 button on the front panel or the remote control to cycle through the

following equalizer settings: 

FLAT

 (EQ ‘Off’), 

CLASSIC

,

 ROCK

,

 

or

 POP

.

The appropriate EQ indicator appears in the display to confirm your selection. The

system remembers the EQ setting when the power is switched ‘Off’ and returns to

the same setting when the power is switched ‘On’ again.

FM STEREO/MONO Button

If you are listening to a weak or distant FM stereo station you may be able to

improve the reception by pressing the 

STEREO/MONO

 button on the front panel

or 

 button on the remote control to select the FM Mono mode.

The 

STEREO

 indicator will go off. The reception will normally improve but the

sound will no longer be in stereo.

NOTE

: The button has no effect when listening to external sources connected

to the 

AUX-IN

 jack.

MS3111M_112306.p65

23/11/2006, 10:44

19

Summary of Contents for MS3111M
















































Reviews:

No comments