20
Listening To The Radio
1.) Press the
STANDBY
(
POWER
) button to turn the system ‘On’. The display
lighting comes ‘On’ and the
STANDBY
light goes ‘Off’.
2.) Press the
FUNCTION
button on front panel or
TUNER
button on remote control
to select the Tuner function.
An
AM
or
FM
frequency will appear on
the display.
Press the
STOP
/
BAND
button again
to switch between the AM and FM bands
if necessary.
3.) Tune to the desired station as follows:
•
Manual Tuning
Repeatedly press the
or
buttons until the display shows the exact
frequency of the desired station. Use the Manual Tuning method to tune to
weak or distant stations that are not strong enough to be recognized by the
Automatic Tuning system.
•
Automatic Tuning
Depress and hold the
or
buttons until the display begins to move, then
release the buttons. The Tuner will search up or down the band for the next
strong signal and stop on that station. Repeat this procedure until the tuner
stops on your desired station.
4.) If you tuned to an FM Stereo station the
STEREO
indicator will appear in the
display.
5.) Adjust the
VOLUME
, and
EQ
controls to the desired settings.
6.) When you are finished listening press the
STANDBY
(
POWER
) button to
return the system to the Standby (Off) mode. The display lighting goes ‘Off’
and the
STANDBY
light comes ‘On’.
MS3108_062806.p65
28/6/2006, 16:54
20
