2 8
TIMER OPERATION
The timer facility allows you to set the unit to switch itself on and off automatically,
for example, to wake you up each morning.
While setting up the timer, make sure you carry out each step within 5 seconds,
otherwise the operation will time out and you will have to start again.
NOTE
: During timer setup, always check the
AM
/
PM
indicator (to the left of the
time) to ensure you make the correct settings.
1.) Select the radio station or CD you wish to play when the unit switches on. (For
CD this can be a programmed selection of tracks if desired.)
2.) Press
TIME MODE/REMAIN
button repeatedly until
TIMER ON
indicator
flashes at the right of the display, then press
TIME-SET/MEMORY
button
immediately.
The
switch-on time
(hour setting) will flash.
3.) Immediately press
or
buttons to set the hour (making sure the flashing
AM
or
PM
is correct), then press
TIME-SET/MEMORY
button.
The minute setting will flash.
4.) Immediately press
or
buttons to set the minute, then press
TIME-SET/
MEMORY
button again.
5.) Press
TIME MODE/REMAIN
button repeatedly until
TIMER OFF
indicator
flashes at the right of the display, then press
TIME-SET/MEMORY
button
immediately.
The
switch-off time
(
hour
setting) will flash.
6.) Immediately press
or
buttons to set the hour, then press
TIME-SET/
MEMORY
button.
The
minute
setting will flash.
7.) Immediately press
or
buttons to set the minute, then press
TIME-SET/
MEMORY
button.
The switch-on and switch-off times have now been set. To check them at any time,
press
TIME MODE/REMAIN
button repeatedly to step through the
TIMER ON
and
TIMER OFF
settings on the display.
MS3103_ib012803.p65
28/1/2003, 11:36
28
