5. Install a new filter (MAF-1) into the
base. Coil the filter and position it
between the uprights in the bottom of
the base. The start and finish of the coil
should be captured at the centre of
the base (see diagram) and the filter
should be resting on the floor of
the base.
6. Return the housing assembly to the top
of the base. Return the water bottle to
the right of the housing assembly and
reposition the humidifier to its operating
position.
7. The humidifier is now ready to be filled
for operation.
Replacement and Care of Filters (continued)
13
Base
Position start and
finish of coiled filter
at center of base.
Align housing
assembly
bottom with
top of base
and reposition
securely.
Return bottle
to right side of
humidifier.
Base Uprights
MA1200 Manual - 71233 7/12/05 2:36 PM Page 13
