Emerson Micro Motion 2500, Configuration And Use Manual

Page: 136 / 238

Postrequisites
• To clear the following alerts, you must correct the problem, acknowledge the alert,
then power-cycle the transmitter: A001, A002, A010, A011, A012, A013, A018,
A019, A022, A023, A024, A025, A028, A029, A031.
• For all other alerts:
- If the alert is inactive when it is acknowledged, it will be removed from the list.
- If the alert is active when it is acknowledged, it will be removed from the list
when the alert condition clears.
Related information
Alert data in transmitter memory
9.4.2 View alerts using the Field Communicator
You can view a list containing all alerts that are active, or inactive but unacknowledged.
• To view active or unacknowledged alerts, choose Service Tools > Alerts.
All active alerts and unacknowledged alerts are listed.
Note
Only Fault and Informational alerts are listed. The transmitter automatically filters out alerts
with Status Alert Severity set to
Ignore
.
• To refresh the list, choose Service Tools > Alerts > Refresh Alerts.
Related information
Alert data in transmitter memory
9.4.3 Alert data in transmitter memory
The transmitter maintains three sets of data for every alert that is posted.
For each alert occurrence, the following three sets of data are maintained in transmitter
memory:
• Alert List
• Alert Statistics
• Recent Alerts
Alert data structure
Transmitter action if condition occurs
Contents Clearing
Alert List As determined by the alert status bits, a list of:
• All currently active alerts
• All previously active alerts that have not
been acknowledged
Cleared and regenerated with every transmit-
ter power cycle
Transmitter operation
128 Micro Motion Model 2500 Transmitters with Configurable Input/Outputs