Emerson Micro-Motion 2400S, Configuration And Use Manual, Page: 9 / 198

Configuration and Use Manual 1
T
ransmitter Use
r Interfac
e
U
sing the Comm
unicator
Usi
n
g
Pr
oL
in
k
II
Bef
o
re
Y
o
u
Be
gin
Chapter 1
Before You Begin
1.1 Overview
This chapter provides an orientation to the use of this manual, and includes a pre-configuration
worksheet. This manual describes the procedures required to start, configure, use, maintain, and
troubleshoot the Model 2400S transmitter with analog outputs (the Model 2400S AN transmitter).
If you do not know what transmitter you have, see Section 1.3 for instructions on identifying the
transmitter type from the model number on the transmitter’s tag.
Note: Information on configuration and use of Model 2400S transmitters with different output options
is provided in separate manuals. See the manual for your transmitter.
1.2 Safety
Safety messages are provided throughout this manual to protect personnel and equipment. Read each
safety message carefully before proceeding to the next step.
1.3 Determining transmitter information
Transmitter type, user interface option, and output options are encoded in the model number located
on the transmitter tag. The model number is a string of the following form:
2400S*X*X******
In this string:
•
2400S
identifies the transmitter family.
• The first X (the seventh character) identifies the output option:
-
A
= Analog outputs
• The second X (the ninth character) identifies the user interface option:
-
1
= Display with glass lens
- 3 = No display
-
4
= Display with non-glass lens