Emerson Micro-Motion 2400S, Configuration And Use Manual, Page: 75 / 198

Configuration and Use Manual 67
Using the Transmitter
Req
u
ir
ed
Con
fig
uration
O
pt
ion
a
l Co
nfi
g
u
ratio
n
Using the
T
ransmitter
Flo
w
me
te
r Sta
rtup
With ProLink II
Table 7-4 shows how you can control the totalizers and inventories using ProLink II.
To enable inventory reset using ProLink II:
1. Click
View > Preferences
.
2. Check the Enable Inventory Totals Reset checkbox.
3. Click
Apply
.
To get to the Totalizer Control screen:
1. Click
ProLink
.
2. Select Totalizer Control .
With the Communicator
Table 7-5 shows how you can control the totalizers and inventories with the Communicator.
Table 7-4 Totalizer and inventory control with ProLink II
To accomplish this On the totalizer control screen...
Stop all totalizers and inventories Click
Stop
Start all totalizers and inventories Click
Start
Reset mass totalizer Click
Reset Mass Total
Reset volume (liquid or gas) totalizer Click
Reset Volume Total
or
Reset Gas Volume Total
Simultaneously reset all totalizers Click
Reset
Simultaneously reset all inventories
(1)
(1) If enabled in the ProLink II Preferences window.
Click
Reset Inventories
Reset mass inventory only
(1)
Click
Reset Mass Inventory
Reset volume (liquid or gas) inventory only
(1)
Click
Reset Volume Inventory
or
Reset Gas Volume inventory
Table 7-5 Totalizer and inventory control with a Communicator
To accomplish this Press this sequence of buttons
Stop all totalizers and inventories
•
2
(Process Variables)
•
4
(Totalizer cntrl)
•
4
(Stop totalizer)
Start all totalizers and inventories
•
2
(Process Variables)
•
4
(Totalizer cntrl)
•
3
(Start totalizer)
Reset mass totalizer
•
2
(Process Variables)
•
4
(Totalizer cntrl)
•
6
(Reset mass total)
Reset volume totalizer
•
2
(Process Variables)
•
4
(Totalizer cntrl)
•
7
(Reset volume total)
Reset all totalizers
•
2
(Process Variables)
•
4
(Totalizer cntrl)
•
5
(Reset all totals)