Emerson Location Awareness, Quick Start Manual

Page: 9 / 36

3.3 Device network configuration
To communicate with the Gateway (and ultimately the host system), the
Location Anchor must be configured to communicate with the wireless
network. Using a Field Communicator or AMS Device Manager, enter the
network ID and join key so they match the network ID and join key of the
Gateway and other devices in the network. If they do not match, the
Location Anchor will not communicate with the network. The network ID
and join key may be obtained from the Gateway on the
Systems
Settings>Network>Network Settings page on the web server, shown in Figure
3-1 .
Figure 3-1: Gateway Network Settings
AMS Device Manager
Right click on the Location Anchor and select Configure . When the menu
opens, select
Join Device to Network
and follow the method to enter the
network ID and join key. See Table 3-1 for menu items.
February 2020 Quick Start Guide
Quick Start Guide 9