Emerson Location Awareness, Quick Start Manual

Page: 18 / 36

7. Remove battery from enclosure.
8. Installation of new battery is the reverse of the removal.
6.4 Location Anchor status and notifications
The flashing LED indicates Location Anchor status using the colors described
in
Table 6-1 . To see the LED, remove the enclosure cover.
Table 6-1: Anchor LED Status Descriptions
LED color Device status
Green Functioning properly
Amber Battery is low, battery replacement
recommended
Red Battery replacement required
OR
Device is malfunctioning
No color No power, verify ON/OFF switch is in “ON”
position
Quick Start Guide February 2020
18 Emerson.com