Emerson Liebert Intellislot Unity Card User Manual Download Page 35

Page: 35 / 92

Enable Communication Protocols

Liebert

IntelliSlot

™

Unity

™

Card User Manual

3.1.3.1.3

Configure SNMPv1 Trap Settings

1. Select

Communications

tab >

Protocols

SNMP

SNMPv1 Trap (20)

2. Click

Edit

and enter a User name and password if required.

3. Enter the information and set the permissions appropriate to the user,

Figure 3-10

For descriptions of the settings, see

5.5.3.3 - SNMPv1 Trap Folder

4. Click

Save

to confirm the changes or

Cancel

to discard them.

5. Repeat

Steps 1

through

for any additional users.

6. Restart the card to confirm the changes.

a. Select the

Communications

tab > Support.

b. Enable the commands.

c. Click

Restart

Figure 3-10 SNMPv1 trap settings

Settings required

for each address

that will receive

SNMP notifications.

Summary of Contents for Liebert Intellislot Unity Card





























































































Search results

Summary of Contents for Liebert Intellislot Unity Card

Reviews:

Related manuals for Liebert Intellislot Unity Card

Brands by name

Popular brands

Emerson Liebert Intellislot Unity Card, User Manual

Search results

Summary of Contents for Liebert Intellislot Unity Card

Reviews:

Related manuals for Liebert Intellislot Unity Card

Brands by name

Popular brands