Emerson Liebert Intellislot Unity Card User Manual Download Page 83

Page: 83 / 92

Editing the Liebert IntelliSlot Unity Card Configuration

Liebert

IntelliSlot

™

Unity

™

Card User Manual

5.7.2

Support—Firmware Update Folder

The Firmware Update folder supports updating the firmware of the Liebert IntelliSlot Unity card or reverting
to an alternate firmware version and configuration (if the current firmware is not the initial load).

Firmware Update settings

Current Firmware Version

The version of the firmware running on the card

Current Firmware Label

The label of the firmware running on the card

Current Firmware Date

The build date of the firmware running on the card

Alternate Firmware Version

The version of the firmware in the alternate area

Alternate Firmware Label

The label of the firmware in the alternate area

Alternate Firmware Date

The build date of the firmware in the alternate area

Summary of Contents for Liebert Intellislot Unity Card





























































































Search results

Summary of Contents for Liebert Intellislot Unity Card

Reviews:

Related manuals for Liebert Intellislot Unity Card

Brands by name

Popular brands

Emerson Liebert Intellislot Unity Card, User Manual

Search results

Summary of Contents for Liebert Intellislot Unity Card

Reviews:

Related manuals for Liebert Intellislot Unity Card

Brands by name

Popular brands