Emerson Liebert GXT4-10000RT230, User Manual, Page: 10 / 68

Important Safety Precautions
Liebert
®
GXT4
™
User Manual 2
This UPS is not intended for use with life support and other designated critical devices. Maximum load
must not exceed that shown on the UPS rating label. This UPS is designed for data processing equipment.
If uncertain, consult your local dealer or Emerson representative.
Battery Safety
ELECTROMAGNETIC COMPATIBILITY —The Liebert GXT4 series complies with the limits for a CLASS
A DIGITAL DEVICE, PURSUANT TO Part 15 of FCC rules. Operation is subject to the following conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired
operation.
Operating this device in a residential area is likely to cause harmful interference that users must correct at
their own expense.
The Liebert GXT4 series complies with the requirements of EMC Directive 2004/108/EC and the published
technical standards. Continued compliance requires installation in accordance with these instructions and
use of accessories approved by Emerson.
Information for the Protection of the Environment
UPS Servicing : UPS makes use of components dangerous for the environment (electronic cards,
electronic components). The components removed must be taken to specialized collection and disposal
centers.
!
WARNING
Risk of electric shock and explosion. Can cause equipment damage, injury and death.
Do not dispose of the battery in a fire. The battery may explode.
Do not open or damage the battery. Released electrolyte is toxic and is harmful to skin and eyes. If
electrolyte comes into contact with the skin, wash the affected area immediately with plenty of
clean water and get medical attention.
!
WARNING
Risk of electric shock. Can cause equipment damage, injury and death.
A battery can present a risk of electrical shock and high short-circuit current. The following
precautions should be observed when working on batteries:
• Remove watches, rings and other metal objects.
• Use tools with insulated handles.
• Wear rubber gloves and boots.
• Do not lay tools or metal parts on top of batteries.
• Disconnect charging source prior to connecting or disconnecting battery terminals.
• Determine if the battery is inadvertently grounded. If it is inadvertently grounded, remove the
source of the ground. Contact with any part of a grounded battery can result in electrical shock.
The likelihood of such shock will be reduced if grounds are removed during installation and
maintenance (applicable to a UPS and a remote battery supply not having a grounded supply
circuit).