Emerson LC 320EM1, Owner'S Manual

Page: 20 / 37

20
EN
Channel List
The channels selected here can be skipped when selecting the
channels using
CH ▲ / ▼
.
Those channels can still be selected with
the Number buttons
.
1
Press MENU to display the main menu.
2
Use ▲ / ▼ to select [Setup] , then press OK .
3
Use ▲ / ▼ to select [Channel List] , then press OK .
4
Use ▲ / ▼ to select the channel you want to remove, then
press OK .
Picture
Sound
Setup
Features
Language
Channel List
Highlight channels for Ch
Up / Down key selection.
DTV 6.1
27.1
DTV 8.1
9.1
DTV 48.1
58.1
DTV 67.1
Ch Select Watch/Skip Back
• The channel display for the removed channel darkens.
You will not be able to select the channel again using
CH ▲ / ▼ .
• To reactivate a removed channel, use ▲ / ▼ and press
OK
. The registered channels are highlighted.
• When you remove a main channel, its subchannels are
removed as well.
5
Press
MENU
to exit.
Note
•
The channel with the [DTV] indicated on the display is ATSC.
Otherwise the channel is NTSC.
Add Channels
This function lets you add the channels that were not added
by the autoprogram due to reception conditions at the initial
setting.
1
Press MENU to display the main menu.
2
Use ▲ / ▼ to select [Setup] , then press OK .
3
Use ▲ / ▼ to select [Add Channels] , then press OK .
4
Use the Number buttons to enter the number of the
channel you want to add, then press OK .
11
Picture
Sound
Setup
Features
Language
Add Channels
For analog channels, select a
channel to be added using number
keys.
For digital channels, you must
perform Autoprogram function.
Add Channels
Ch Change Back
5
Press MENU to exit.
Note
•
If setup completes successfully,
[Added to the channel list]
is displayed.
•
If external input is used, it is not possible to register the channel and
[Unavailable] will be displayed on the TV screen.
•
By using CH ▲ / ▼ , you can select the memorized channels only.