Emerson IE Series, Manual, Page: 8 / 12

Page: 5
IE Series
Figure 3: Connections and Wiring
LINE INPUT
FROM SOURCE
RELAY
CONTACTS
TO REMOTE
INDICATION
IF NEEDED
TO LOAD OR
EQUPMENT
TO PROTECT
NO COM NC
LINE LOAD
GND
L/L1
N/L2
GND
L/L1
N/L2
GND
Diagnostic Operation
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
• Apply appropriate personal protective equipment (PPE) and follow safe electrical work practices. See NFPA 70E,
CSA Z462, or NOM-029-STPS.
Failure to follow these instructions will result in death or serious injury.
Indicator Status ON =
The device is installed correctly and the line side has power.
Indicator Status OFF =
Check connections, verify that the line voltage is at the point of connection; if all is correct,
then replace the device.
Dry Contact Terminal Power OFF Power ON
N/O Normally Open Open Closed
COM Common Common Common
N/C Normally Closed Closed Open