Repair Parts List
1
2
3A
4
5
9
10
16
12
11
15
13
6
14
7
8
3B
SUITABLE FOR USE WITH EMERSON SOLID STATE
SPEED CONTROL.
3. Slide the upper canopy up the rod within 1/4" of the
ceiling or beam and securely tighten the setscrew.
4. If a remote speed control is to be used refer to the
instructions included with that control for proper
installation and wiring.
5. Restore power.
6. After completing installation, test run fan in normal
operation manner. Inspect for any possible shake or
wobble which may be caused by binding as a result of
"tight cable". if this should happen, shut off power supply
and re-check instructions to correct problem.
NOTE: When any solid state motor speed control is
used, a humming noise may be present in the fan on
low speed. This hum in no way affects the operation of
the fan and is acceptable in most industrial
installations.
Maintenance
LUBRICATION - All bearings are permanently lubricated
and do not require further lubrication.
CLEANING - This fan may be wiped off with a damp cloth.
Do not allow the motor to get wet. Do not use solvents or
harsh detergents.
TO AVOID POSSIBLE ELECTRICAL SHOCK, BE SURE
ELECTRICITY IS TURNED OFF AT THE MAIN SERVICE
BOX BEFORE SERVICING.
WARNING
DO NOT USE WATER WHEN CLEARING YOUR CEILING
FAN. IT COULD DAMAGE THE MOTOR OR THE
BLADES AND CREATE THE POSSIBILITY OF AN
ELECTRICAL SHOCK.
WARNING
LIMITED WARRANTY
A
ll products covered by this Owner’s Manual are warranted against defects in workmanship and
materials for one year from date of sale, except for motor which is warranted against defects in
workmanship and materials for two years. This warranty does not apply to damage from accident,
misuse, or alteration; nor where the connected voltage is more than 5% above the nameplate
voltage; nor to equipment improperly installed or wired or maintained in violation of this Owner’s
Manual. This warranty is valid only in the fifty states of the United States. No other written or oral
warranty applies. No employee, agent, dealer or other person is authorized to give any warranties
on behalf of Emerson Electric Co.
The customer shall be responsible for all costs incurred in the removal or reinstallation and
shipping of the product for repairs. Within the limitations of this warranty, inoperative units should
be returned, freight prepaid, to the nearest Emerson authorized service center, or the Emerson
Electric Co. Service Center, and we will repair or replace, at our option, at no charge to you with
return freight paid by Emerson. It is agreed that such repair or replacement is the exclusive
remedy available from Emerson Electric Co. and that EMERSON IS NOT RESPONSIBLE FOR
DAMAGES OF ANY KIND, INCLUDING INCIDENTAL AND CONSEQUENTIAL DAMAGE. Some
states do not allow the exclusion or limitation of incidental or consequential damages, so the
above exclusion or limitation may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
For the address of your nearest authorized service center, call toll-free 1-800-654-3545.
Merchandise returned to the factory must be accompanied by a return authorization and service
identification tag, both available from Air Comfort Products, Division of Emerson Electric Co.,
8100 W. Florissant, St. Louis, MO 63136. When requesting return authorization include all model
numbers shown on the product.
WARNING
THIS PRODUCT IS DESIGNED TO USE ONLY THOSE
PARTS SUPPLIED WITH THIS PRODUCT AND/OR ANY
ACCESSORIES DESIGNATED SPECIFICALLY FOR USE
WITH THIS PRODUCT BY EMERSON ELECTRIC.
SUBSTITUTION OF PARTS OR ACCESSORIES NOT
DESIGNATED FOR USE WITH THIS PRODUCT BY
EMERSON ELECTRIC COULD RESULT IN PERSONAL
INJURY OR PROPERTY DAMAGE.
Before discarding packaging material, be certain all parts have
been removed.
HOW TO ORDER REPAIR PARTS
WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE
FOLLOWING INFORMATION:
•
PART NUMBER
•
NAME OF ITEM
•
PART DESCRIPTION
•
MODEL NUMBER
The model number of your Fan will be found on a label attached to the
top of the motor.
For repair parts, phone 1-800-654-3545.
Printed in Taiwan 07/98
Part No. F40BP71650001
Form No. BP7165-1
EMERSON
Air Comfort Products
DIVISION OF EMERSON ELECTRIC CO.
8100 W. Florissant, St. Louis, MO 63136
8100 W. Florissant, St. Louis, MO 63136
Key
No.
Description
HF948W 0
1
J-Hook Bag Assembly
761385
J-Hooks (2 ea.)
—
Hardware (2 ea.)
—
2
Hanger Assembly
761339
3A
Hanger Nipple, 22”
761387
3B
Hanger Nipple, 8”
761387-2
4
Upper Canopy
761335
5
Lower Canopy
761336
6
Blades (set of 3)
761412
7
Capacitor
761337
Bag Assembly, containing:
761384
8
5/16-18 x 1/4” Setscrews (2 ea.)
—
9
Hairpin Clip
—
10
Clevis Pin
—
11
Safety Wire Clamp (2 ea.)
—
12
Screw, M6 x 1/2” (6 ea.)
—
13
Spring Washer, M6 (6 ea.)
—
14
Blade Gasket (3 ea.)
—
15
Wire Connector (3 ea.)
—
16
Allen Wrench
—
—
Owner's Manual (Not Shown)
BP7165-1
