13
5.) Press the
PLAY/PAUSE
button to begin playback. The display will briefly
show two flashing dashes “
– –
” as the player reads the disc.
The total tracks and playing time will appear briefly
in the display and then the playback will begin on
track ‘
01
’.
The display will show the elapsed playing time of
the track being played.
6.) Adjust the
VOLUME
and
EQ
controls to your listening preference.
If you prefer more Bass, slide the
BBS
switch to ‘
ON
’ position.
7.) Playback will continue until the end of the disc, then
the player will stop automatically and the display will
again show the total tracks and playing time on the
disc.
After approximately 30 seconds the power switches ‘Off’ automatically to
conserve the batteries and the display goes blank.
To stop playback before the disc ends press the
STOP
button at any time.
Press the
STOP
button after the disc has stopped to shut the power ‘Off’
’
completely.
Pause Control
To pause momentarily during playback press the
PLAY/PAUSE
button again.
The elapsed time display flashes. The sound stops but
the disc continues to spin.
Press the
PLAY/PAUSE
button once more to cancel Pause mode and resume
normal playback. The elapsed time display stops flashing.
HD8115_B101205.p65
12/10/2005, 11:35
13
