15
Programmed Playback
You can program up to 20 tracks on a disc to play in any desired order.
Note:
You can program a disc either during playback or in Stop mode.
1.) Press the
PROG
button once.
The
PGM
indicator and the Track
number “
00
” will flash and the
Program number “
01
” appears in the
display.
2.) Press the
or
button to select
the first track to be programmed.
Example: Track #
03
.
3.) When the desired track number flashes in the display press the
PROG
button
again to enter the desired track number in Program Number “01”.
The Program number advances to
“
0 2
”.
4.) Repeat Steps 2 and 3 to program additional tracks up to a maximum of 20.
5.) Press the
PLAY/PAUSE
button to begin programmed playback.
The
PGM
indicator stops flashing.
• Playback begins with the first track you programmed and continues until all
programmed tracks have been played, and then the player stops.
• The programmed sequence will remain in the memory until the power shuts
off (approximately 30 seconds) or until the CD door is opened.
• If you press the
PROG
and
PLAY/PAUSE
buttons again before the power
shuts off the programmed sequence will play again.
HD7998_B081105.p65
11/8/2005, 15:05
15
