Emerson GEO10, Reference Manual

Page: 114 / 147

Quick Start Guide February 2020
6 Emerson.com
2
Installation Plantweb Insight and Plantweb Insight
Location application
2.1
Install Plantweb Insight and Plantweb Insight Location application
Follow instructions in the Plantweb Insight Quick Start Guide.
3
Location Anchor configuration
3.1
Safety messages
Failure to follow these installation guidelines could result in death or serious injury.
Ensure only qualified personnel perform the installation.
Explosions could result in death or serious injury.
Before connecting a handheld communicator in an explosive atmosphere, ensure the instruments are installed in
accordance with intrinsically safe or non-incendive field wiring practices.
Verify that the operating atmosphere of the transmitter is consistent with the appropriate hazardous locations
certifications.
Electrical shock could cause death or serious injury.
Use extreme caution when making contact with the leads and terminals.
This Location Anchor complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: This
Location Anchor may not cause harmful interference. This Location Anchor must accept any interference received,
including interference that may cause undesired operation.
This Location Anchor Model GEO20 must be installed to ensure a minimum antenna separation distance of 20 cm
from all persons.
3.2
Location Anchor configuration
Remove the Location Anchor electronics cover and connect to the HART
®
Communication terminals for
configuration.
The Emerson Location Anchor will receive HART Communication from any HART handheld Field
Communicator or AMS Device Manager.
AMS Device Manager
AMS Device Manager can connect to devices directly, using a HART modem, or remotely using the
Gateway. To configure the Emerson Location Anchor, double click (or right click and select Configure/Setup)
on the device icon that will appear below either the HART modem or Gateway connection tree.
WARNING