background image

Troubleshooting Guide: 

 

You can easily solve many common problems by trying the suggestions below: 
 

 
SYMPTOM 
 

POSSIBLE CAUSE 

Vibrations 

 

 

Check to make sure the wine cooler is on a level surface 

The door will not close 
properly 

 

  The wine cooler is not on a level surface 

  The racks are out of position 

 

Fan is always running. 

  This is simply a function of the cooling system. The lower the 

setting, the more the fan will run. If the room is warmer than 77°F 
(25°C), it will run more 

  The unit has been designed to run continuously when operating 

at the lower temperatures 

Unit has no power. 

 

Check the wall outlet for power. Make sure the outlet is not 
controlled by a wall switch 

The inside temperature 
does not seem correct 

  Make sure the cooling vents on each side of the cooler are not 

obstructed. Have at least 5 inch (15cm) of space on each side of 
unit. 

  The unit will have difficulty in cooling if the set temperature is 

32°F (18°C) below the ambient temperature. 

Example: if the ambient temperature is 86°F (30°C), the unit 
will have difficulty cooling to 54°F (12°C). 

 

When using the unit for the first time, it can take up to 24 hrs to 
reach the desired temperature 

The unit does not 
operate 

  It may not be plugged into the wall socket 

  Make sure the wall socket is functional by testing another 

electrical appliance in the power socket 

  Make sure the circuit breaker is not tripped or a fuse is blown 

There is a puddle of 
water under / around the 
wine cooler  

 

This wine cooler features a self-evaporation system. An external 
drip tray is therefore not required for accumulating condensation. 
If water forms under / around the wine cooler, the humidity level 
in the room is too high. Either try to lower the humidity level in the 
room (using for example a dehumidifier) or place the wine cooler 
in an another room 

The unit will not cool. 
Power is On. 

Make sure there are at least 3-5 bottles in the unit. 
Allow at least 24 hours for the internal temperature to adjust 
properly. 
 

*Because of technological limitation , the interior temperature can be 
set between 44°F (7°C) and 66°F (19°C) on the control panel only at 
the room temperature of 77°F (25°C)

 

 
To achieve accurate temperature control, the unit should 

not

 be used 

or operated in any of the following locations: 

  in a sunny place 

  in a room with poor air circulation such as a garage 

  near another heat producing appliance (dishwasher, oven, 

refrigerator). 

  with an outlet shared with a refrigerator as it will drain power from 

the unit. 

  built-in a wall recess, niche or cabinet. 

-5- 

Summary of Contents for FR24RD











Reviews: