background image

www.Fisher.com

Fisher

 

Large EH Design Supplement

24X20 Class 1500 Design EHT-2 Control Valve

This supplement provides information for serial numbers ME00124272 and ME00124273

Overview

This special instruction manual is a supplement to the Fisher EHD and EHT Sliding-Stem Control Valves (Large EH)
Instruction Manual (

D100392X012

). Observe all warnings, cautions, and notes provided in the Large EH instruction

manual. Contact your 

Emerson sales office

 or Local Business Partner for more information.

Scope

This special instruction sheet provides maintenance information for NPS 24X20 Class 1500 Design EHT-2 control
valves. This information covers valve serial numbers ME00124272 and ME00124273. For other procedures, refer to
the Fisher EHD and EHT Sliding-Stem Control Valve (Large EH) Instruction Manual (D100392X012).

Table 1. Fisher Large EH Specifications

Specifications

Design Pressure

242 Barg (3510 Psig)

Design Temperature

88

°

C (190

°

F)

End Connections

NPS 24 CL1500 RTJ Flange

Shutoff Classification

ANSI Class IV

Flow Characteristic

Linear - - See figure 3

Flow Direction

Flow Down

Port Diameter

18 1/4 in

Valve Plug Travel

10 7/8 in

Valve Yoke Boss

7 in

Maximum Flowing Pressure Drop

103 bar (1500 psi)

Maximum Shutoff Pressure Drop

258 bar (3750 psi)

Estimated Weight of Valve

and Actuator Assembly

11500 kgf (25,500 lbf )

Large EH

August 2018

Instruction Manual Supplement

D104372X012

Summary of Contents for Fisher ME00124272







Reviews: