background image

Type LR125

Facebook.com/EmersonAutomationSolutions
LinkedIn.com/company/emerson-automation-solutions
Twitter.com/emr_automation

[email protected]

60

45

29

61

62

59

ERAA00984_B

TYPE MR95H/MR95HP PILOT

TYPE 112

RESTRICTOR

Figure 18. 

Type LR125 with Type MR95H/MR95HP Pilot and Type 112 Restrictor with Pre-Piped Pilot Supply

Fisher.com

Emerson Automation Solutions

Americas 

McKinney, Texas 75070 USA 

T   +1 800 558 5853 

+1 972 548 3574

Europe 

Bologna 40013, Italy 

T  +39 051 419 0611

Asia Pacific

 

Singapore 128461, Singapore 

T  +65 6777 8211

Middle East and Africa 

Dubai, United Arab Emirates 

T  +971 4 811 8100

D103576X012 © 2012, 2020 Emerson Process Management Regulator 

Technologies, Inc. All rights reserved. 01/20.

 

The Emerson logo is a trademark and service mark of Emerson Electric 

Co. All other marks are the property of their prospective owners.

 

Fisher™ is a mark owned by Fisher Controls International LLC, a business 

of Emerson Automation Solutions.
The contents of this publication are presented for informational purposes 

only, and while every effort has been made to ensure their accuracy, 

they are not to be construed as warranties or guarantees, express or 

implied, regarding the products or services described herein or their use 

or applicability. All sales are governed by our terms and conditions, which 

are available upon request. We reserve the right to modify or improve the 

designs or specifications of such products at any time without notice.
Emerson Process Management Regulator Technologies, Inc does not 

assume responsibility for the selection, use or maintenance of any 

product. Responsibility for proper selection, use and maintenance of any 

Emerson Process Management Regulator Technologies, Inc. product 

remains solely with the purchaser.

Summary of Contents for Fisher LR125 Series

























Reviews: