Emerson Fisher GX Instruction Manual Download Page 24

Page: 24 / 64

Instruction Manual

D103175X012

GX Valve and Actuator

April 2011

Figure 8. Fisher GX Travel Stop Assembly

COVER PLATE

CAP SCREW
(4)

CAP SCREW (4)

LEVER

ADJUSTABLE
CAP SCREW (2)

STUD AND
NUT (4)

DOWNSTOP

UPSTOP

GX Travel Stop Installation

Downstop

1. Note the orientation of the lever to the stem connector for downstop positioning, as shown in figure 9. Adjust the

travel stop to allow positioning the lever below the stem connector before installation.

2. Install the travel stop to the GX mounting pad with four studs and nuts, as shown in figure 8. Torque to 24.5 N

(18 lbf

ft).

3. Apply lithium grease to the tip of the lever (where it contacts the stem connector) and to the two adjustable cap

screws, as shown in figure 9.

Upstop

1. Note the orientation of the lever to the stem connector for upstop positioning, as shown in figure 9. Adjust the

travel stop to allow positioning the lever above the stem connector before installation.

2. Install the travel stop to the GX mounting pad with four studs and nuts, as shown in figure 8. Torque to 24.5 N

(18 lbf

ft).

3. Apply lithium grease to the tip of the lever (where it contacts the stem connector) and to the two adjustable cap

screws, as shown in figure 9.

Summary of Contents for Fisher GX

































































Search results

Summary of Contents for Fisher GX

Reviews:

Related manuals for Fisher GX

Brands by name

Popular brands

Emerson Fisher GX, Instruction Manual

Search results

Summary of Contents for Fisher GX

Reviews:

Related manuals for Fisher GX

Brands by name

Popular brands