Emerson Fisher ET-C Instruction Manual Download Page 24 | Manualshive

Page: 24 / 24

background image

Instruction Manual

D102175X012

EZ-C, ET-C, and EWT-C Valves

July 2017

24

Key 2* Fisher ET‐C and EWT‐C Valve Plug

VALVE SIZE,

NPS

PORT DIAMETER

SEAT STYLE

Metal

Composition

S31600 w/CoCr‐A Seat

S31600 Seat

Inches

mm

12.7 mm (1/2 Inch)

Stem

19.1 mm (3/4 Inch)

Stem

12.7 mm (1/2 Inch)

Stem

19.1 mm (3/4 Inch)

Stem

3

3.4375

87.3

34B8275X012

34B8190X012

34B8288X012

34B8289X012

4, 6X4, 8X4

4.375

111

34B8276X012

34B7639X012

34B8290X012

34B8291X012

6, 8X6, 12X6

7

178

19.1 mm (3/4 Inch)

Stem

25.4 mm (1‐Inch)

Stem

19.1 mm (3/4 Inch)

Stem

25.4 mm (1‐Inch)

Stem

34B8278X012

34B8279X012

34B8292X012

34B8293X012

8, 10X8

8

203

34B8280X012

34B8281X012

34B8294X012

34B8296X012

Key 7* Fisher ET‐C and EWT‐C Valve Stem, S20910

VALVE SIZE, NPS

STEM DIAMETER

ACTUATOR GROUP

S20910

(XM‐19)

mm

Inches

3

12.7
19.1

1/2
3/4

1
1

10A8840XBD2

10A9265XBF2

4, 6X4, 8X4

12.7
19.1

1/2
3/4

1
1

10A8840XAD2
10A9265XBG2

6, 8X6,

12X6

19.1
25.4
25.4

3/4

1
1

1

100
101

10A9265XBH2

11A3429XR72
11A3429XR62

8, 10X8

19.1
25.4

3/4

1

1

100, 101

10A9265XBJ2

11A3429XR82

*Recommended spare parts

Emerson Automation Solutions

Marshalltown, Iowa 50158 USA
Sorocaba, 18087 Brazil
Cernay 68700 France
Dubai, United Arab Emirates
Singapore 128461 Singapore

www.Fisher.com

The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not
to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are
governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such
products at any time without notice.

E

1995, 2017 Fisher Controls International LLC. All rights reserved.

Fisher and ENVIRO-SEAL are marks owned by one of the companies in the Emerson Automation Solutions business unit of Emerson Electric Co. Emerson
Automation Solutions, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their
respective owners.

Neither Emerson, Emerson Automation Solutions, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance
of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.

«
...
22
23
24

Summary of Contents for Fisher ET-C

























Reviews:

No comments

Related manuals for Fisher ET-C

Brand: Panasonic Pages: 68

Brand: Panasonic Pages: 27

Brand: Panasonic Pages: 168

Brand: Panasonic Pages: 8

Brand: Panasonic Pages: 3

Brand: Panasonic Pages: 20

Brand: Panasonic Pages: 29

Brand: Panasonic Pages: 37

Brand: Panasonic Pages: 9

Brand: QUAD Pages: 17

Brand: fadini Pages: 16

Brand: Gardner Denver Pages: 22

Brand: B&G Pages: 2

Brand: Neets Pages: 12

Brand: National Instruments Pages: 24

Brand: Zamel Pages: 2

Brand: National Instruments Pages: 19

Brand: Baier Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands