manualshive.com logo in svg

Emerson Fisher EHD, Instruction Manual

Share
Download
Emerson Fisher EHD Instruction Manual Download Page 36

Instruction Manual

D100394X012

EH (1-1/2x1 through 8x6)

July 2017

36

Actuator Groups by Type Number

Group 1

54 mm (2‐1/8 Inch),

71 mm (2‐13/16 Inch),

or 90 mm (3‐9/16 Inch) Yoke Boss

Group 101

127 mm (5 Inch) Yoke Boss

Group 404

127 mm (5 Inch, 5H) Yoke Boss

101.6 mm (4 Inch) Maximum

Travel

Group 408

177.8 mm (5H, 7 Inch) Yoke

Boss

101.6 mm (4 Inch) Maximum

Travel

472 & 473

585C, 585CR (50.8 mm [2 inch] maximum

travel)

1B & 655

657 & 667—76.2 mm (3 Inch) maximum

travel

657‐4, 667‐4 (76.2 mm [3 inch] travel)

1008—Except 90 mm (3‐9/16 Inch) yoke

boss with 50.8 mm (2 inch) travel

3024C, 3025

685SE, 685SR (76.2 mm [3 inch] maximum

travel)

667, 667 MO

667, 667‐4

3025 (ATO)

657 Size 100

1008 Size 100

3025 (ATC)

Group 401

90.5 mm (3‐9/16 Inch)

Yoke Boss

88.9 to 101.6 mm (3.25 to 4 inch)

Travel

Group 405

127 mm (5 Inch, 5H) Yoke Boss

101.6 mm (4 Inch) Maximum

Travel

Group 409

177.8 mm (5H, 7 Inch) Yoke

Boss

101.6 mm (4 Inch) Maximum

Travel

657, 657 MO
667, 667 MO

657‐4, 657‐4 MO
667‐4, 667‐4 MO

3025

685SE, 685SR

657 MO, 657‐4 MO

667 Size 100

3025 (ATO)

Group 406

127 mm (5 Inch, 5H) Yoke Boss

101.6 mm (4 Inch) Maximum

Travel

Group 801

90.5 mm (3‐9/16 Inch)

Yoke Boss

203.2 mm (8 Inch) Maximum

Travel

667 MO, 667‐4 MO

585C, 585C MO Size 60

685SE, 685SR

Group 100

127 mm (5 Inch, 5H) Yoke Boss

Group 402

90.5 mm (3‐9/16 Inch)

Yoke Boss

101.6 mm (4 Inch) Maximum

Travel

Group 407

127 mm (5 Inch, 5H) Yoke Boss

101.6 mm (4 Inch) Maximum

Travel

Group 802

127 mm (5 Inch, 5H)

Yoke Boss

203.2 mm (8 Inch) Maximum

Travel

472, 473

585C, 585C MO

657, 657 MO

1008 PDTC

585C MO Size 60

585C, 585C MO

657

3025 (ATC)

685SE, 685SR

585C, 585C MO

685SE, 685SR

Group 403

90.5 mm (3‐9/16 Inch)

Yoke Boss

101.6 mm (4 Inch) Maximum

Travel

585C Size 60
1008 Size 50

*Recommended spare parts

Emerson Automation Solutions 

Marshalltown, Iowa 50158 USA
Sorocaba, 18087 Brazil
Cernay 68700 France
Dubai, United Arab Emirates
Singapore 128461 Singapore

www.Fisher.com

The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not
to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are
governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such
products at any time without notice.

E

 

1981, 2017 Fisher Controls International LLC. All rights reserved.

Fisher, Cavitrol, ENVIRO-SEAL, and Whisper Trim are marks owned by one of the companies in the Emerson Automation Solutions business unit of Emerson
Electric Co. Emerson Automation Solutions, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are
the property of their respective owners.

Neither Emerson, Emerson Automation Solutions, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance
of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.

Summary of Contents for Fisher EHD





































Reviews:

No comments

Brands by name

Popular brands

Load more brands