background image

www.Fisher.com

CML Electronic Actuator 
for Baumann

 

24000 Series

Contents

Introduction

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Scope of Manual

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Actuator Specifications

2

. . . . . . . . . . . . . . . . . . . . . . .

Educational Services

3

. . . . . . . . . . . . . . . . . . . . . . . . .

Maintenance

4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Recommended Installation Location

4

. . . . . . . . . . . .

Installation

7

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Calibration and Setup

7

. . . . . . . . . . . . . . . . . . . . . . . .

Parts Ordering

8

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Figure 1. Baumann 24000CVF Valve with 
CML-250 Electric Actuator

X1450

Introduction

CML electric actuators (figure 1) provide high accuracy for industrial temperature, HVAC, and sanitary applications
with Baumann sliding-stem control valves.

Scope of Manual

This instruction manual includes installation information for CML electric actuators.

Do not install, operate, or maintain CML electric actuators without being fully trained and qualified in valve, actuator,
and accessory installation, operation, and maintenance. 

To avoid personal injury or property damage, it is important

to carefully read, understand, and follow all the contents of this manual, including all safety cautions and warnings.

 If

you have any questions about these instructions, contact your 

Emerson sales office

 before proceeding.

Instruction Manual

D104302X012

CML Electric Actuator

January 2019

Summary of Contents for Fisher CML-750









Reviews: