background image

www.Fisher.com

Baumann

 26000 Corrosion Resistant 

Control Valve

Contents

Introduction

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Scope of Manual

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Safety Precautions

2

. . . . . . . . . . . . . . . . . . . . . . . . . . .

Maintenance

3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Installation

3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Air Piping

4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Packing Adjustments

4

. . . . . . . . . . . . . . . . . . . . . . . . .

Disassembly

4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Reassembly and Calibration

5

. . . . . . . . . . . . . . . . . . .

Parts Ordering

7

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Dimensions and Weights

9

. . . . . . . . . . . . . . . . . . . . . . .

Figure 1. Baumann 26000 Control Valve

W9766

26000 Control Valve with

Baumann 32 Actuator

and Dual Travel Stops

26000 Valve with Baumann 32

Actuator, Dual Travel Stops, and

FIELDVUE

t

 DVC6200 Digital

Valve Controller

X0663

Introduction

Scope of Manual

This instruction manual includes installation, maintenance, and parts information for the Baumann 26000 corrosion
resistant control valve.

Do not install, operate, or maintain Baumann 26000 control valves without being fully trained and qualified in valve,
actuator, and accessory installation, operation, and maintenance. 

To avoid personal injury or property damage, it is

important to carefully read, understand, and follow all the contents of this manual, including all safety cautions and
warnings.

 If you have any questions about these instructions, contact your 

Emerson sales office

 or Local Business

Partner before proceeding.

Description

The Baumann 26000 Corrosion Resistant Control Valve (figure 1) features a flangeless wafer valve body. The 316
stainless steel flangeless body and thru-hole wafer design allows for installation between plastic pipeline flanges
without risk of gasket leakage. This same valve body, fully pressurized, retains an all wetted PTFE interior resulting in a
solid mechanical structure.

Instruction Manual

D103363X012

26000 Valve

June 2017

Summary of Contents for Fisher Baumann 26000













Reviews: