background image

Instruction Manual

D104734X012

ATST Desuperheater

July 2022

2

Table 1. Specifications

Connections

(1)(3)

Steam Line:

 NPS 8 through NPS 60 

(DN 200 through 1500)

Spraywater:

 NPS 1 through 4 (DN 25 through 100)

Atomizing Steam:

 NPS 1 (DN 25)

Connection Types

(1)(3)

Steam Line 

(all sizes)

:

 

J

Buttweld , 

J

Raised Face

Flanges, 

J

Ring Type Joint Flanges

Spraywater:

 

J

ASME Buttweld (all sizes), 

J

Raised

Face Flanges (all sizes), 

J

Ring Type Joint Flanges (all

sizes), 

J

Socket Weld

Atomizing Steam

 (all sizes)

:

 

J

Raised Face Flanges,

J

Ring Type Joint Flanges

Pressure Class

(1)(3)

Steam Line:

 According to the customer design

pressure and temperature

Spraywater and Atomizing Steam: 

ASME CL150 to

CL2500

(4)

Construction Materials

(5)

Desuperheater Body and Liner (if applicable):

J

Carbon Steel, 

J

2-1/4 Cr-1 Mo 

J

9 Cr-1 Mo-V

J

9 Cr-2 W-V

Spray Nozzles: 

J

R31233 Cobalt-Chrome Alloy

Gaskets: 

J

N06600/Graphite

Bolting: 

J

SA193 Grade B7, 

J

SA193 Grade B16,

J

N07718

Maximum Inlet Pressures

(1)

Consistent with applicable pressure-temperature
ratings per ASME B16.34

Maximum Unit Cv (for Spraywater Flow)

Contact your 

Emerson sales office

Spraywater Pressure Required

(2)

3.5 to 35 bar (50 to 500 psi) greater than steam line
pressure

Atomizing Steam Pressure Required

Atomizing steam source pressure typically should be
at least 2 times the pressure of the steam to be
desuperheated

1. Do not exceed the pressure or temperature limits in this manual, nor any applicable code or standard limitations.

2. A function of required turndown and equipment selection.

3. Offerings meet ASME standards. Consult your Emerson sales office for additional options.
4. Intermediate rating above CL2500 available upon request. PN ratings also available per pressure requirements of EN1092-1. Consult your Emerson sales office for additional information.

5. EN material options available upon request, consult your Emerson sales office for additional information.

Educational Services

Emerson Automation Solutions
Educational Services - Registration
Phone: 1-800-338-8158
E-mail: [email protected]
emerson.com/mytraining

Summary of Contents for Fisher ATST Desuperheater













Reviews: