background image

www.Fisher.com

Fisher

 585CLS Long Stroke Piston Actuator

Contents

Introduction

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Safety Instructions

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Specifications

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Inspection and Maintenance Schedules

2

. . . . . . . . . . .

Parts Ordering

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Installation

3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operation

3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Maintenance

3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Latest Published Instruction Manual

5

. . . . . . . . . . . . . .

Introduction

The product covered in this document is 

Inactive

. This document, which includes the latest published version of the

instruction manual, is made available to provide updates of newer safety procedures. Be sure to follow the safety
procedures in this supplement as well as the specific instructions in the included instruction manual.

Part numbers in the included instruction manual should not be relied on to order replacement parts. For replacement
parts, contact your 

Emerson sales office

 or Local Business Partner.

For more than 20 years, Fisher products have been manufactured with asbestos‐free components. The included
manual might mention asbestos containing parts. Since 1988, any gasket or packing which may have contained some
asbestos, has been replaced by a suitable non‐asbestos material. Replacement parts in other materials are available
from your sales office.

Safety Instructions

Please read these safety warnings, cautions, and instructions carefully before using the product.

These instructions cannot cover every installation and situation. Do not install, operate, or maintain this product
without being fully trained and qualified in valve, actuator and accessory installation, operation and maintenance. 

To

avoid personal injury or property damage it is important to carefully read, understand, and follow all of the contents of
this manual, including all safety cautions and warnings.

 If you have any questions about these instructions, contact

your Emerson sales office or Local Business Partner before proceeding.

Instruction Manual

D103793X012

585CLS Actuator

April 2018

Summary of Contents for Fisher 585CLS

















Reviews: