Emerson EWV603 Owner'S Manual Download Page 8

12. Information

- 8 -

EN

Servicing

Should your VCR become inoperative, do not
try to correct the problem by yourself. There
are no user-serviceable parts inside. Turn off,
unplug the power plug, and please call our
help line mentioned on page 1 to locate an
Authorized Service Center.

Cabinet Cleaning

• Wipe the front panel and other exterior sur-

faces of the VCR with a soft cloth immersed
in lukewarm water and wrung dry.

• Never use a solvent or alcohol. Do not spray

insecticide liquid near the VCR. Such chemi-
cals may cause damage and discoloration to
the exposed surfaces.

Auto Head Cleaning

• Automatically cleans video heads as you insert or

remove a cassette, so you can see a clear picture.

• Playback picture may become blurred or interrupt-

ed while the TV program reception is clear. Dirt
accumulated on the video heads after long peri-
ods of use, or the usage of rental or worn tapes
can cause this problem. If a streaky or snowy pic-
ture appears during playback, the video heads in
your VCR may need to be cleaned.

1. Please visit your local Audio/Video store and pur-

chase a good quality VHS Video Head Cleaner.

2. If a Video Head Cleaner does not solve the

problem, please call our help line mentioned on
page 1 to locate an Authorized Service Center.

NOTES:

• Remember to read the instructions included with

the video head cleaner before use.

• Clean video heads only when problems occur.

PREPARACIÓN DE CANALES 
(La antena o la caja de televisión por

cable deberá estar conectada)

NOTES:

Cuando utilice su nueva

videograbadora por primera vez, o en el
caso de ser necesario después de pro-
ducirse un fallo en la alimentación, la
videograbadora se pondrá inicialmente en el
modo de preajuste cuando se pulse
[POWER].

1. Encienda el televisor y ponga el televisor

en el canal 3.

2. Pulse [POWER] para encender la

videograbadora.

3. Seleccione "ENGLISH",

"FRANCAIS"(French)
o "ESPAÑOL"
(Spanish) pulsando
[PLAY] o [STOP]. Y
luego pulse [F.FWD].

4. Pulse una vez

[F.FWD].
El sintonizador explora
y memoriza todos los canales activos de su
zona. Tras la exploración, el sintonizador se
detiene en el canal memorizado más bajo.

PREPARACIÓN DEL RELOJ

1. Pulse [MENU] hasta que aparezca el

menú principal. (Si el reloj no está puesto
en hora y se pulsa [MENU], el menú
AJUSTE DE RELOJ aparece en primer
lugar. En este caso, siga el paso 3.)

2. Pulse [PLAY] o [STOP] para indicar a

"AJUSTE DE RELOJ". Luego, pulse [F.FWD].

3.

• Para volver atrás un

paso, pulse [REW].

4. Pulse [F.FWD] para

poner en fun-
cionamiento el reloj.

Ajuste el mes.

Ajuste el día.

Ajuste el año.

Ajuste el minuto.

Ajuste la 
mañana (AM) o 
la tarde (PM).

Ajuste la hora.

Pulse repetidamente [PLAY] o [STOP].
Luego, pulse [F.FWD].

Pulse repetidamente [PLAY] o [STOP].
Luego, pulse [F.FWD].

Pulse repetidamente [PLAY] o [STOP].
Luego, pulse [F.FWD].

Pulse repetidamente [PLAY] o [STOP].
Luego, pulse [F.FWD].

Pulse repetidamente [PLAY] o [STOP].
Luego, pulse [F.FWD].

Pulse repetidamente [PLAY] o [STOP].

SELEC. IDIOMA

ENGLISH

FRANCAIS

B

ESPAÑOL

[ON]

AJUSTE DE RELOJ

MES

DIA

AÑO

03

/

15

LUN

2004

HORA MINUTO   AM/PM

05

:

40

PM    AM

B

PM

Maintenance

Instrucciones en Español

Funai Corporation will exchange or repair this prod-
uct, at its option, in the event of defect in materials
or workmanship as follows:

EXCHANGE DURATION:
1-90 DAYS:

FUNAI CORPORATION will
exchange for a new unit without
charge for a period of ninety (90)
days from the date of original retail
purchase.

91-365 DAYS:

FUNAI CORPORATION will exchange
for a factory-service-to-new-condition
unit for a charge of a retailed price unit
for the period of ninety one (91) days to
three hundred sixty five (365) days from
the date of original retail purchase.

REPAIR DURATION:
LABOR:

FUNAI CORPORATION will provide 
the labor without charge for a period
of ninety (90) days from the date of
original retail purchase.

PARTS:

FUNAI CORPORATION will provide
parts to replace defective parts
without charge for a period of one
(1) year from the date of original
retail purchase. Certain parts are
excluded from this warranty.

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGI-
NAL RETAIL PURCHASER. A PURCHASE RECEIPT OR
OTHER PROOF OF ORIGINAL RETAIL PURCHASE
WILL BE REQUIRED TOGETHER WITH THE PRODUCT
TO OBTAIN EXCHANGE OR SERVICE UNDER THIS
WARRANTY.
This warranty shall not be extended to any other per-
son or transferee.
This warranty is void and of no effect if any serial
numbers on the product are altered, replaced,
defaced or missing. This EMERSON Limited warran-
ty applies only to product purchased and used in the
United States.
This warranty only covers failures due to defects in
material or workmanship, which occur during normal
use. It does not cover damage which occurs in ship-
ment, or failures which are caused by repairs, alter-
ations, or parts not supplied by FUNAI CORPORA-
TION, or damage which results from accident, mis-
use, abuse, mishandling, misapplication, alteration,
faulty installation, improper maintenance, commer-
cial use such as hotel, rental or office use of this
product, or damage which results from fire, flood,
lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING
MATERIALS, ANY ACCESSORIES (EXCEPT
REMOTE CONTROL UNITS), ANY COSMETIC
PARTS, COMPLETE ASSEMBLY PARTS, DEMON-
STRATION OR FLOOR MODELS.

FUNAI CORPORATION AND ITS REPRESENTA-
TIVES OR AGENTS SHALL IN NO EVENT BE
LIABLE FOR ANY GENERAL, INDIRECT OR CON-
SEQUENTIAL DAMAGES ARISING OUT OF OR
OCCASIONED BY THE USE OF OR THE INABILITY
TO USE THIS PRODUCT. THIS WARRANTY IS
MADE IN LIEU OF ALL OTHER WARRANTIES
INCLUDING THE WARRANTY OF MERCHANT
ABILITY, AND FITNESS FOR A PARTICULAR PUR-
POSE, THAT ARE HEREBY DISCLAIMED BY
FUNAI CORPORATION AND ITS REPRESENTA-
TIVES OR AGENTS IN THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS
MUST BE PERFORMED BY A FUNAI AUTHO-
RIZED CENTER. THIS WARRANTY IS VALID
WHEN THE PRODUCT IS DELIVERED PREPAID
TO A FUNAI AUTHORIZED SERVICE FACILITY.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE, IF AT ANY
TIME DURING THE WARRANTY PERIOD YOU
ARE UNABLE TO OBTAIN SATISFACTION WITH
THE EXCHANGE OR REPAIR OF THIS PRODUCT,
PLEASE CONTACT FUNAI CORPORATION.

ATTENTION:

FUNAI CORPORATION RESERVES THE

RIGHT TO MODIFY ANY DESIGN OF

THIS PRODUCT WITHOUT PRIOR

NOTICE.

For information about your product, or for

information on how to exchange or repair

your product, telephone or write to the fol-

lowing:

FUNAI CORPORATION, INC.

SERVICE CENTER

19900 Van Ness Avenue, Torrance, CA 90501

Telephone (800)256-2487

http://www.funai-corp.com

Head Office: 100 North Street, Teterboro, NJ 07608

PLEASE DO NOT SHIP YOUR UNIT TO THE

TETERBORO ADDRESS.

LIMITED WARRANTY

Summary of Contents for EWV603









Reviews: