1-5-1
TD300DC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts, and the CBA in order to gain access to
item(s) to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
CAUTION!
When removing the CRT, be sure to discharge the
Anode Lead of the CRT with the CRT Ground Wire
before removing the Anode Cap.
2. Disassembly Method
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to the following “Reference Notes in the
Table”.
[1] Rear Cabinet
[2] H.V. CBA (with Holder)
[3] Tray Chassis Unit
[5] Shield Box
[4] CRT
[6] DVD Mechanism
[9] Main CBA
[8] DVD
Main
CBA
Unit
[7] DVD
Junction
CBA
[10] H.V./
DC Power
Supply
CBA
ID/
LOC.
No.
PART
REMOVAL
Fig.
No.
REMOVE/
*UNHOOK/UNLOCK/
RELEASE/UNPLUG/
DESOLDER
Note
[1]
Rear
Cabinet
1
4(S-1), 1(S-2), 2(S-3)
-
[2]
H.V. CBA
(With
Holder)
3, 5
4(S-4), Anode Cap,
CN501, CRT CBA,
CN571, WH551,
WH552, WH554
1
[3]
Tray
Chassis
Unit
3, 5 CN1802, CN1801
-
[4]
CRT 2
4(S-5)
-
[5]
Shield Box 3
5(S-6)
-
[6]
DVD
Mechanism
3, 4,
5
2(S-7A), 3(S-7B),
CN401, CN601
-
[7]
DVD
Junction
CBA
3, 5
(S-7C), CN1603
-
[8]
DVD Main
CBA Unit
4, 5
2(S-8), CN201,
CN301
2
3
[9]
Main CBA 3, 5
4(S-9)
-
[10]
H.V./DC
Power
Supply
CBA
3, 5
7(S-10), (S-11),
Shield Case Top,
Shield Case Bottom,
FBT Holder
-
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)