background image

– 24 –

EN

– 24 –

– 24 –

– 24 –

– 24 –

– 24 –

CAMERA ANGLE

Some DVDs contain scenes which have been shot
simultaneously from various angles. You can change
the camera angle when the “

” icon appears on the

screen.

1   

Hit [ANGLE] during playback.

¡

If the “ANGLE ICON” setting
is “OFF” in the “DISPLAY”
menu, the “

” icon will not

appear. (Refer to page 27.)

2   

Hit [ANGLE] repeatedly to select your
desired angle.

¡

The selected angle will be displayed on the display
bar at the top of the screen.

DVD-V

Adjust the Black Level Settings to make the black
parts of the picture brighter.

1   

Hit [MODE] during playback.

2   

Hit [ENTER] to switch “ON / OFF”.

ON: Makes the dark parts brighter.
OFF: Shows the original picture as recorded.

3   

Press [MODE] twice or [RETURN] to exit.

NOTE:

¡

The setting will be saved even if the unit is turned
off.

DVD-V

BLACK LEVEL SETTING

You can enjoy surround-sound effect over two speak-
ers on this unit.

1   

Press [V.SURR] once or [MODE] twice 
(CD: once) during playback.

2   

Hit [ENTER] to set it “1” (Natural effect), “2”
(Emphasized effect) or “OFF”.

3   

Press [V.SURR] or [MODE] to exit.

¡

You can also exit the menu by hitting 

[RETURN]

.

NOTE (for CD play only):

¡

Virtual Surround will not be effective if the sound
mode is set to something other than STEREO.

CD

DVD-V

VIRTUAL SURROUND

 OFF

 OFF

 1 / 8

Summary of Contents for EWC09D5B









































Reviews: