![Emerson ES58 Owner'S Manual Download Page 14](http://html.mh-extra.com/html/emerson/es58/es58_owners-manual_104268014.webp)
1 3
SETTING THE CLOCK
1.) Switch the unit to Standby mode by pressing the
STANDBY/ON
button.
2.) Press and hold the
MEMORY/CLOCK
button. “ 24 H ” (24 Hour format) will flash
in the display. Press the
or
button to select “ 12 H ” (12 Hour format).
3.) Press the
MEMORY/CLOCK
button. The hour digit will flash.
Press the
or
buttons to set the correct hour. Be sure to set correctly for
AM
or
PM
.
4.) Press the
MEMORY/CLOCK
button again. The Hour is now set and the Minute
digits start to flash in the display.
5.) Press the
or
buttons to set the correct minute.
6.) Press the
MEMORY/CLOCK
button again. The Minutes are now set and the clock
will start to run.
NOTE:
• Clock time is only retained while the unit is plugged into the AC outlet. In
the event of a power failure the clock will need to be reset when the power
supply resumes.
• Clock time is only shown when unit is in Standby mode.
ES58_012904.p65
29/1/2004, 15:24
13