12
OPERATING INSTRUCTIONS
• Make sure that you have unwound the AC power cord and the FM
wire antenna and extended them to their full length.
• Make sure that you have connected the speakers.
• Make sure that you have removed the plastic battery spacer tab from
the remote control.
Setting The Clock
When you connect the system to the AC outlet for the
first time, the Standby indicator lights, the main display
turns ‘On’ and shows “
AM 12:00
”.
Do not press the
POWER
button. The system must be in the Standby mode to
set the clock.
You have the option of displaying the time in 12-Hour or 24-Hour modes.
12-Hour Mode
- The time is displayed in 12-hour cycles with
AM
/
PM
indicators.
This is the factory default setting.
24-Hour Mode
- The time is displayed in 24-hour cycles with no AM / PM indicators.
This is sometimes referred to as “Military Time”.
For example, “
PM 6:00
” would be displayed as “
18:00
”.
1.) Depress the
PROGRAM/MEM./CLK. ADJ
button, “
12H
” flashes in the display.
Then press either the
or
buttons to alternatively to switch between
the 12-hour and 24-hour display modes.
ES128_042806.p65
28/4/2006, 11:39
12
