18
Setting The Clock
When the system is connected to an AC outlet the time display will show a flashing
“
12:00 AM
” and the “
CLOCK
” indicator appears.
This is your indication that the time is incorrect
and needs to be set.
Note
: Although it is not necessary to set the clock in order to listen to the radio
or CD player, the clock must be set correctly if you intend to use the timer to
turn the system ‘On’ and ‘Off’ automatically.
Set the clock as follows:
1.) Press the
MEMO.
(
MEMORY
) button once.
The ‘Hour’ digits begin flashing.
2.) Repeatedly press the
or
buttons adjust the display to the correct hour,
AM
or
PM
.
3.) Press the
MEMO.
(
MEMORY
)
button again to set the hour.
The ‘Minute’ digits begin to flash.
4.) Repeatedly press the
or
buttons to adjust the display to the correct
minute.
5.) Press the
MEMO.
(
MEMORY
) button again to set the minutes.
Only the colon “
:
” continues flashing.
The clock begins to run.
ES1065_021705.p65
17/2/2005, 15:41
18
