Model 1000
©Emerson Process Management Regulator Technologies Tulsa, LLC, 2015, Rev. B; All Rights Reserved
The Emerson logo is a trademark and service mark of Emerson Electric Co. All other marks are the property of their prospective owners. Enardo is a mark owned by Regulator Technologies Tulsa, LLC,
a business of Emerson Process Management.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or
guarantees, express or implied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specifications of such
products at any time without notice.
Emerson Process Management Regulator Technologies Tulsa, LLC does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use
and maintenance of any Emerson Process Management Regulator Technologies Tulsa, LLC product remains solely with the purchaser.
Emerson Process Management
Regulator Technologies Tulsa, LLC
9932 East 58th Street
Tulsa, OK 74146-6411
Tel: +1 918 662 6161
Fax: +1 918 662 0004
For further information visit www.enardo.com
Specifications
The Specifications table lists the specifications for the Model 1000 lock down hatch.
Bolt Pattern
8 in. CL150
8 in. API
Material Construction
Aluminum base, arm and lid closed cell sponge
Neoprene (CR) gaskets
Optional Equipment
Special application gasketing, bolt and gasket set, base
gasket only or non-corrosive coating foot pedal operator
Approximate Shipping Weight
20 lbs
/
9 kg
Lid Gasket Replacement
1. The lid gasket is the gasket in the ring groove on the
underside of the lid that seats against the base lip.
Remove the old gasket by peeling it from underneath
the groove.
2. Thoroughly clean the groove and apply a small amount
of rubber adhesive. Fit the new gasket under the groove
by slowly moving the gasket into the groove around
the lid.
3.
Make sure that the gasket lays flat and is pushed under
the lip of the retaining ring groove.
Note
Replace only with Enardo replacement
gaskets as the gasket material is specially
designed for hatch service and not
commonly available.
Maintenance
Perform a scheduled maintenance every six (6) months
and more frequently in corrosive or dusty atmospheres. To
perform normal maintenance, inspect lid gasket and base
gasket. Under average operating conditions, replace the lid
gasket once a year. Replace the base gasket when a leak is
noticed on the tank deck.
To ensure efficient operation of all hatches, carefully wipe off
the seats and gaskets every time the hatch is opened. This
prevents accumulation of residue that can deteriorate the
performance of the hatch.
Note
For parts information refer to the catalog
data sheet on each model.
