2
FEATURE CHART
(Only twist)
!
F SHELF (MOVABLE)
@
ICE HOLDER ASSEMBY
#
ICE CASE FRAME ASSEMBLY
$
ICE BOX
%
FREEZER TEMPERATURE
CONTROL KNOB
^
CHILLED CASE
&
LAMP COVER
*
REFRIGERATOR TEMPERATURE
CONTROL SWITCH
(
R SHELF (MOVABLE)
)
VEGETABLE CASE COVER
1
VEGETABLE CASE
2
FREEZER POCKET
3
UTILITY POCKET
4
EGG CASE
5
BOTTLE POCKET (LARGE)
6
BOTTLE POCKET (SMALL)
2
4
5
6
3
!
@
#
$
^
&
*
(
)
1
%
■
Ice Case Frame Assembly
1) Fill the ice case with water upto the water level line and insert it into the designated
space in the ice holder.
2) After the water is completely frozen, twist
the ice case handle clockwise and let the
ice fall into the ice box below. When all
ice has been cleared from the ice case,
let go of the handle which will return to its
original position by a return spring
installed.
RETURN SPRING
ICE CASE FRAME
STARTING POINT OF TWISTING
120
°
ICE CASE
3
CAUTION:
1. Check your voltage before inserting the power supply cord into the socket.
2. Contact the earthing conductor to this unit with an attachment earthing screw.
3. Do not spill liquid on this unit.
4. Do not use flammable spray, such as painting, near this unit.
5. Do not place ignitable material, such as benzine, L.P. gas, alcohol etc., into this unit.
6. Take precautions against leakage of any gas equipment near this unit.
7. Keep chidren from hanging on the door of this unit.
8. Do not reinsert the power supply cord within 5 minutes after releasing it from the
socket. If not, there may be problems with the compressor.
9. Put food in the refrigerator after running the refrigerator for 2~3 hours.
Take a moment to know all the features designed for the convenience of the user.
■
Ice tray
Fill 3/4 of the ice tray with water, as the volume expands when the water is frozen. Place
the tray in the freezer compartment. To release ice cubes, twist the ice tray slightly. Ice
cubes will be easier to remove if it is held for a short while under running water.
■
Movable refrigerator and freezer shelves
Storage shelves should be adjusted depending on the height of the food stored. To do this,
pull the shelves slightly forward.
■
Defrost-drain Vessel
Since dust accumulated on the drain case decreases the evaporation efficiency, you
should clean the drain case at regular intervals.
■
Vegetable case
May be used for fruit and vegetable storage. Both the vegetable case and its cover shelf
are removable for easy cleaning. Simply slide forward to remove.
■
Utility Pocket (Top)
The Egg Case in this pocket can be turned upside down for the use of small size goods.
Location
Install the refrigerator in a convenient location away from extreme heat and cold. Allow
at least 6cm clearance between the refrigerator and side wall so that the door may open
for a fully usable interior and the refrigerator may have good air circulation. The
refrigerator is not designed for recessed installation.
■
Select a strong and level floor.
■
Keep 6cm of space between the refrigerator and the walls.
Here are the features of your new refrigerator.
HOW TO INSTALL
