License Management
Setup
•
19
3.8
License Management
Some applications in the E2 are only available when
activated with a license key that is obtained through Retail
Solutions. Licensing allows the user to activate certain
features in the E2.
To obtain a license for a feature, go to the TCP/IP
setup screen and obtain your E2 controller’s MAC
Address. Press
+ T, or from the Main Menu:
1.
Press
(System Configuration).
2.
Press
(Remote Communications).
3.
Press
(TCP/IP Setup) to open the TCP/IP
Setup screen and locate your E2’s MAC address
(circled in
Figure 3-20
- TCP/IP Screen - Locating the Mac Address
4.
Call Retail Solutions Customer Service at
770-
425-2724
and have your MAC Address ready in
order to obtain your unique license key.
Once you have received your unique license key from
Customer Service, you can now activate the licensed fea-
ture(s) from the License Report screen. The License
Report screen displays that E2 controller’s unit type and
firmware version, the list of all licensed features on that
E2, the current number and maximum number of each of
those applications allowed, and which additional features,
(that require a license key), have been enabled.
From the Main Menu:
1.
Press
(System Configuration).
2.
Press
(Licensing).
3.
Press
(Add Feature).
Enter your license key to activate the desired feature:
Figure 3-21
- Enter Your Unique License Key
4.
Reboot the controller and open the License
Report screen again to see the license key appear
next to the activated feature (
):
Figure 3-22
- License Report Screen
3.8.1
Web Services
Web Services is a licensed feature that allows the user,
once the required license has been obtained and entered, to
view and adjust certain parameters in the E2 controller
through a Web page. The E2 Web Services feature enables
the user to:
• View site-specific information such site name, site
phone, local date and time.
• View the current version of the E2. This includes
the type of unit (e.g., RX-400) and the version of
the firmware.
• View global data values such as outside air temper-
ature and humidity.
• View a list of other networked area controllers at
the site, including version and controller type infor-
mation.
• Connect to the selected E2 for remote configuration
