Emerson CR275BSE2, Owner'S Manual

Page: 9 / 12

4
3
BOTTOM VIEW
Install the leveling foot and the bottom hinge bracket on the new bottom side . Then tighten the
screws of the bottom hinge bracket .
Slot in the appliance door into the bottom hinge pin . Replace the upper hinge bracket on the new
side and check the fitting between the door / hinge moving smoothly . Then tighten the screws of
upper hinge bracket . Replace the hinge cover and the right side screw cover .
Check that the door is aligned horizontally and vertically and that the seals are closed on all
sides before finally tightening the upper hinge . Re - adjust the leveling feet .