Single-Compressor Module
Material Data Safety Sheet
26
2008SSD-34 (5/11)
a.6 f
ire
aNd
e
xplosioN
h
azards
Flash Point (by Cleveland Open
Cup)
320-530°F (160-276°C)
Flammable Limits
Not established
Auto-Ignition Temperature
No data
HMIS Ratings
Health
0
Flammability
1
Reactivity
0
NFPA Ratings
Not established
Extinguishing Media
Dry chemical; CO
2
foam; water spray (fog)
Unusual Fire and Explosion Hazards
None
Special Fire Fighting Techniques
Burning fluid may evolve irritating/noxious fumes. Firefighters should
use NIOSH/MNSA-approved self-contained breathing apparatus.
Use water to cool fire-exposed containers. Use water carefully near
exposed liquid to avoid frothing and splashing of hot liquid.
a.7 r
eaCtivity
d
ata
Stability
Stable
Hazardous Polymerization
Will not occur
Incompatible Materials
Strong oxidizers
Conditions to Avoid
Excessive heat
Hazardous
Decomposition
Products
Analogous compounds evolve carbon monoxide, carbon dioxide,
and other unidentified fragments when burned. See
A.6 - Fire and
Explosion Hazards
.
a.8 h
ealth
h
azard
d
ata
Threshold Limit Value
5mg/m
3
ACGIH
Situations to Avoid
Avoid breathing oil mists.
First Aid
Procedures
Ingestion
Consult physician at once. DO NOT INDUCE VOMITING. May cause
nausea and diarrhea.
Inhalation
Product is not toxic by inhalation. If oil mist is inhaled, remove to fresh
air and consult physician.
To the best of our knowledge the toxicity of this product has not been fully investigated.
Analogous compounds are considered to be essentially non-toxic.
a.9 p
ersoNal
p
roteCtioN
i
NformatioN
Respiratory Protection
Use in well ventilated area.
Ventilation
Local exhaust
Protective Gloves
Not required, but recommended, especially for prolonged exposure
Eye/Face Protection
Goggles
a.10 s
pill
or
l
eak
p
roCedures
In case of spill:
• Wear suitable protective equipment, especially goggles.
• Stop source of spill.
• Dike spill area.
• Use absorbent materials to soak up fluid (e.g., sand, sawdust, commercially available materials).
• Wash spill area with large amounts of water.
• Properly dispose of all materials.
a.11 W
aste
d
isposal
m
ethods
Incinerate this product and all associated wastes in a licensed facility in accordance with federal, state,
and local regulations.
