4
AGL_Stream_ST_4MTL_4MSL_E_Rev01
maximum standstill pressures of 135 bar at high side and 90 bar at low side
– see Chapter 3.2.1
"Safety relief valves". Refrigerant flow and heat transfer have been optimized for best performance.
NOTE: Throughout these guidelines, pressure values shown with the bar(a) or bar unit are
absolute pressures. For values in relative (gauge) pressure, bar(g) will be used.
NOTE: The compressor is only one component which must be combined with many others to
build a functional and efficient refrigeration system. Therefore the information in this manual
relates to Copeland Stream semi-hermetic compressors for CO
2
transcritical and subcritical
applications with standard equipment and accessories only.
2.2
Nomenclature
The model designation contains the following technical information about Stream CO
2
compressors:
Figure 1: Nomenclature
* The oil type is indicated on the nameplate
– see Chapter 2.3 "Nameplate information". Several oils
are qualified
– see Chapter 2.5.1 "Qualified refrigerant and oils".
2.3 Nameplate information
All important information for identification of the compressor is printed on the nameplate located
below the left cylinder bank:
▪
the year and month of production are shown as part of the serial number (Jan = A,
Feb = B, …
Dec = L);
▪
type of refrigerant (R744);
▪
type of lubricant: POE or PAG.
Figure 2: Nameplate information
20C = Produced in March 2020
POE68 = Oil type
R744 = CO
2
refrigerant
