Menu Options Description • Homeowner Manual
15
The Weekdays/Weekends programming selection will provide a
separate heat cool profile for the five consecutive weekdays and
a different profile for the two weekend days.
3. Thermostat Settings – Backlight
This menu item controls the display backlight, you can choose
either:
AUTO
– (Default) Backlight comes on when you press any
key. Backlight goes off after a short delay when there is no
button pressed
ON – Backlight is always On.
4. Thermostat Settings – Temperature Limits
Temperature limits can be used to set limits on how high your
heating temperature can be set and how low your cooling
temperature can be set. The range for both values is from 45°F to
99°F.
Cool Setpoint –
45°F
(default)
Heat Setpoint –
99°F
(default)
5. Thermostat Settings – Adjust Temp Display
This allows you to adjust the displayed temperature up to 5°
higher or lower than the actual room temperature.
Your thermostat was accurately calibrated at the factory, but you
have the option to change the display temperature to match your
previous thermostat. The current or adjusted room temperature
will be displayed on the left side of the display while your desired
offset will be displayed on the right side of the display.
Options for this menu item include:
+1° t5° – Adjusts the displayed temperature the
specified number of degrees higher than the measured room
temperature.
