15
ALARM OPERATION
This unit gives you the option of waking to an electronic buzzer alarm, the AM/FM
radio, or the CD player. You may also program the CD player to wake you to a
specific track or series of tracks if desired.
NOTE:
Whichever alarm mode you select – Buzzer, Radio OR CD – will apply to
both alarms.
First press the ALARM 1 or ALARM 2 button to check the wake up time setting.
Adjust the wake up time if necessary. Refer to “SETTING THE WAKE UP TIMES”
on page 8.
Wake To Alarm
1.) Set the ALARM SELECTOR switch to AL 1, AL 2, or AL 1+2.
2.) Set the ALARM MODE switch to ‘BUZZER’. The ALM 1, ALM 2, or both
indicators appears in the display.
3.) At the selected wake up time the electronic buzzer turns ‘On’. It will continue
for 60 minutes and then turn ‘Off’ and reset itself for the following day.
4.) To stop the buzzer immediately, press the POWER button. The buzzer stops
and the alarm resets itself for the following day.
5.) To cancel the alarm completely set the ALARM MODE switch to ‘Off’. The
Alarm indicator disappears.
Wake To Radio
1.) Set the ALARM SELECTOR switch to AL 1, AL 2, or AL 1+2.
2.) Turn the radio ‘On’, tune to the desired band and station, adjust the volume to
the desired level to wake you up, and turn the radio ‘Off’ again.
3.) Set the ALARM MODE switch to ‘AUTO’. The ALM 1, ALM 2, or both indicators
appears in the display.
4.) At the selected wake up time the radio turns on. It will play for 60 minutes, then
shut off and reset itself for the following day.
CKD3810_ib.p65
18/3/2002, 14:10
15
