10
Setting The Wake-Up Times
The procedure for setting the Alarm 1 and Alarm 2 wake up times
is the same.
1.) Slide the
ALARM 1
switch, located on the left side of the
cabinet to the “
SET
” position.
The display changes from the correct time to
the Alarm 1 wake-up time. The first time you
set the Alarm 1 or Alarm 2 wake-up time the
display will flash “
12:00
” (AM).
2.) Press the
SKIP/ SEARCH
/ HOUR
button to set the display to the desired
Alarm 1 wake-up hour, AM or PM. If the
PM
indicator is ‘Off’ the wake-up hour
displayed is AM.
3.) Press the
SKIP/SEARCH
/ MIN.
button to adjust the display to the desired
Alarm 1 wake-up minute.
4.) Slide the
ALARM 1
switch back to the “
OFF
” position. The display changes
from the Alarm 1 wake-up time back to the correct time.
5.) Follow the same procedure to set the Alarm 2 wake-up time if desired.
To check the wake-up times just slide the
ALARM 1
or
ALARM 2
button to the
“
SET
” position at any time. Slide the switches back to the “
OFF
” position to return
to the correct time.
Note:
If both of the Alarm switches are set to “
SET
” at the same time the clock
will display the correct current time, not the Alarm 1 or Alarm 2 wake up time.
So be sure to set the
ALARM 1
switch back to the “
ON
” or “
OFF
” position
before setting the
ALARM 2
switch to the “
SET
” position.
PM
AL 1
AL 2
ALARM 1
CKD2300_060305.p65
3/6/2005, 11:04
10
