Emerson CF620AP00, Owner'S Manual

Page: 6 / 16

6
U.L. Model No.: CF620
8. Remove the shipping spacers and the spacer
attachment screws from the motor before
installation of blade assemblies. Discard the
spacers and spacer screws (Figure 6).
9.
Mount blade flanges (supplied with fan) to fan
blades (sold separately) using four #10 - 24 x
12mm washer head screws and four 16mm flat
washers (supplied with fan) (Figure 7).
NOTE: Some accessory blades available are
supplied with shorter screws. These shorter
screws MUST be used to assemble the blades to
flanges.
NOTE: Take care not to scratch fan housing when
installing blades.
10.
Loosely attach one blade/flange assembly to the
motor hub by securing the two 1/4 - 20 x 14mm
captive pan head screws. Make sure the screws
are NOT tightened (Figure 8). Repeat this
procedure for other four blade assemblies.
11. Once all five blade/flange assemblies are
secured to the motor hub, proceed to tighten all
the 1/4 - 20 x 14mm captive pan head screws at
this time.
12.
Remove one #8 - 32 x 8mm pan head screw
from the lower housing adapter plate (reserve for
later use). Loosen the other two screws to
assemble the lower housing to the lower housing
adapter plate (Figure 9).
13.
Position the lower housing onto the fan motor
assembly, aligning each of the the three holes.
Rotate the lower housing to engage the two
loosened screws in the two key hole slots.
Replace the #8 - 32 x 8mm pan head screw
(removed previously) and tighten all three screws
to secure the lower housing to the lower housing
adapter plate (Figure 9).
NOTE: Make sure wires are not pinched between
lower housing adapter plate and lower housing.
How to Put Your Ceiling Fan Together
(continued)
SPACER ATTACHMENT
SCREW
SHIPPING
SPACER
Figure 6
BLADE FLANGE
FAN BLADE
(Sold Separately)
#10 - 24 x 12mm WASHER
HEAD SCREW
(4 per blade/flange)
16mm FLAT WASHER
(4 per blade/flange)
Figure 7
1/4 - 20 x 14mm CAPTIVE
PAN HEAD SCREW (2)
BLADE/FLANGE ASSEMBLY (5)
Figure 8
LOWER HOUSING
ADAPTER PLATE
LOWER HOUSING
REMOVE ONE #8 - 32 x
8mm PAN HEAD SCREW
LOOSEN TWO #8 - 32 x
8mm PAN HEAD SCREWS
Figure 9
To reduce the risk of personal injury, do not bend the
blade flange when installing the blade flanges,
balancing the blades or cleaning the fan. Do not
insert foreign objects in between rotating fan blades.
WARNING
!