Emerson Centellis 2000, Installation And Use Manual

Page: 38 / 58

Board Exchange
Centellis 2000 User Card-10GE Installation and Use (6806800H33B )
38
The board provides two independent power inputs according to the AdvancedTCA
specification. Each input has to be equipped with an additional fuse of max. 90 A located either
in the shelf where the board is installed or the power entry module (PEM).
4.2.1.3 Required Equipment
Gather the following equipment before starting:
z
Screwdriver
z
ESD wrist strap
4.2.2 Unpacking and Inspecting the Board
Shipment Inspection
To inspect the shipment, perform the following steps:
1. Verify that you have received all items of your shipment:
z
Printed Safety Notes
z
Centellis 2000 User Card-10GE
z
Any optional items ordered
Board Damage
Touching the board or electronic components in a non-ESD protected environment causes
component and board damage.
Before touching boards or electronic components, make sure that you are working in an
ESD-safe environment or wear ESD wrist straps.